Standard Lintel Clamp Kit with Bottom Brackets for Masonry Fireplace Doors
Let’s set the scene: you’ve got a gorgeous masonry fireplace. You’ve found the perfect door for it—sleek, beautiful, probably the fireplace equivalent of a tailored blazer. Now comes the fun part…installation. If you’re staring into your firebox like it just insulted your intelligence, allow me to introduce you to the real MVP of the mounting world: the Standard Lintel Clamp Kit with Bottom Brackets.
This kit isn’t just “standard” in name—it’s the go-to solution when you want your fireplace door installed right and without mystery screws or confusing instructions that make you question your life choices.
What This Kit Does (Besides Save Your Sanity):
It allows you to install almost any masonry fireplace door, as long as your fireplace has a lintel iron. (That’s the steel angle bracket across the top inside of your firebox—holding up your brick or facing. Not sure if you have one? Shine a flashlight up there. If you see steel, you’re in business.)
Once that’s confirmed, this combination mounting kit brings the whole gang together: lintel clamps + bottom brackets + all the bits and pieces needed to make your fireplace door sit pretty and stay put.
What's in the Kit (Deep Breath… It's a Lot):
4 Lintel Clamps (because more clamps = more stability)
2 End Brackets
4 Thumb Screws (easy to tighten without power tools, or the wrath of whoever borrowed your drill)
2 Flat Washers
2 Round Neck Round Phillips Head Bolts
2 HEX Head Slot Screw Bolts
2 HEX Sheet Metal Screws
2 Lead Screw Anchors
Everything you need is right here. Unless you’re installing your door on a lintel made of clouds and optimism, this kit’s got your back.
A Few Pro Tips From Yours Truly:
This kit adjusts from 4” to 6”, so unless your fireplace is moon-sized or magically shrinking, it should fit like a glove.
Your fireplace must have a steel lintel iron. No lintel? No deal.
Nadia’s Tip (because I’ve been there): If for any reason things aren’t tightening down quite the way you like, pick up a few self-tapping screws from your local hardware store and gently secure the lintel clamp into the iron and the backside of your fireplace door. It’s not cheating—it’s being clever.
Why You’ll Love It (and Why Your Door Will Thank You):
Universal Fit – Works with most masonry fireplace doors
Complete Hardware Kit – No more mid-installation grocery bag bolts
Secure, Sturdy, Satisfying – The door will feel solid, not swingy
DIY-Friendly – No PhD in engineering required
Trusted by Experts (and people like me with strong opinions about fireplaces)
The Bottom Line:
This Standard Lintel Clamp Kit with Bottom Brackets isn’t just a box of parts—it’s the final piece of your fireplace upgrade puzzle. It takes the guesswork out of mounting and replaces it with confidence, control, and a fireplace door that stays exactly where you put it.
So go ahead. Grab that screwdriver, channel your inner DIY royalty, and install that door like the fire-savvy human you are.
And remember—when in doubt, tighten gently and don’t forget the washers.
Free Shipping: Ships Out In 2-3 Business Days
Let’s set the scene: you’ve got a gorgeous masonry fireplace. You’ve found the perfect door for it—sleek, beautiful, probably the fireplace equivalent of a tailored blazer. Now comes the fun part…installation. If you’re staring into your firebox like it just insulted your intelligence, allow me to introduce you to the real MVP of the mounting world: the Standard Lintel Clamp Kit with Bottom Brackets.
This kit isn’t just “standard” in name—it’s the go-to solution when you want your fireplace door installed right and without mystery screws or confusing instructions that make you question your life choices.
What This Kit Does (Besides Save Your Sanity):
It allows you to install almost any masonry fireplace door, as long as your fireplace has a lintel iron. (That’s the steel angle bracket across the top inside of your firebox—holding up your brick or facing. Not sure if you have one? Shine a flashlight up there. If you see steel, you’re in business.)
Once that’s confirmed, this combination mounting kit brings the whole gang together: lintel clamps + bottom brackets + all the bits and pieces needed to make your fireplace door sit pretty and stay put.
What's in the Kit (Deep Breath… It's a Lot):
4 Lintel Clamps (because more clamps = more stability)
2 End Brackets
4 Thumb Screws (easy to tighten without power tools, or the wrath of whoever borrowed your drill)
2 Flat Washers
2 Round Neck Round Phillips Head Bolts
2 HEX Head Slot Screw Bolts
2 HEX Sheet Metal Screws
2 Lead Screw Anchors
Everything you need is right here. Unless you’re installing your door on a lintel made of clouds and optimism, this kit’s got your back.
A Few Pro Tips From Yours Truly:
This kit adjusts from 4” to 6”, so unless your fireplace is moon-sized or magically shrinking, it should fit like a glove.
Your fireplace must have a steel lintel iron. No lintel? No deal.
Nadia’s Tip (because I’ve been there): If for any reason things aren’t tightening down quite the way you like, pick up a few self-tapping screws from your local hardware store and gently secure the lintel clamp into the iron and the backside of your fireplace door. It’s not cheating—it’s being clever.
Why You’ll Love It (and Why Your Door Will Thank You):
Universal Fit – Works with most masonry fireplace doors
Complete Hardware Kit – No more mid-installation grocery bag bolts
Secure, Sturdy, Satisfying – The door will feel solid, not swingy
DIY-Friendly – No PhD in engineering required
Trusted by Experts (and people like me with strong opinions about fireplaces)
The Bottom Line:
This Standard Lintel Clamp Kit with Bottom Brackets isn’t just a box of parts—it’s the final piece of your fireplace upgrade puzzle. It takes the guesswork out of mounting and replaces it with confidence, control, and a fireplace door that stays exactly where you put it.
So go ahead. Grab that screwdriver, channel your inner DIY royalty, and install that door like the fire-savvy human you are.
And remember—when in doubt, tighten gently and don’t forget the washers.
Free Shipping: Ships Out In 2-3 Business Days
Let’s set the scene: you’ve got a gorgeous masonry fireplace. You’ve found the perfect door for it—sleek, beautiful, probably the fireplace equivalent of a tailored blazer. Now comes the fun part…installation. If you’re staring into your firebox like it just insulted your intelligence, allow me to introduce you to the real MVP of the mounting world: the Standard Lintel Clamp Kit with Bottom Brackets.
This kit isn’t just “standard” in name—it’s the go-to solution when you want your fireplace door installed right and without mystery screws or confusing instructions that make you question your life choices.
What This Kit Does (Besides Save Your Sanity):
It allows you to install almost any masonry fireplace door, as long as your fireplace has a lintel iron. (That’s the steel angle bracket across the top inside of your firebox—holding up your brick or facing. Not sure if you have one? Shine a flashlight up there. If you see steel, you’re in business.)
Once that’s confirmed, this combination mounting kit brings the whole gang together: lintel clamps + bottom brackets + all the bits and pieces needed to make your fireplace door sit pretty and stay put.
What's in the Kit (Deep Breath… It's a Lot):
4 Lintel Clamps (because more clamps = more stability)
2 End Brackets
4 Thumb Screws (easy to tighten without power tools, or the wrath of whoever borrowed your drill)
2 Flat Washers
2 Round Neck Round Phillips Head Bolts
2 HEX Head Slot Screw Bolts
2 HEX Sheet Metal Screws
2 Lead Screw Anchors
Everything you need is right here. Unless you’re installing your door on a lintel made of clouds and optimism, this kit’s got your back.
A Few Pro Tips From Yours Truly:
This kit adjusts from 4” to 6”, so unless your fireplace is moon-sized or magically shrinking, it should fit like a glove.
Your fireplace must have a steel lintel iron. No lintel? No deal.
Nadia’s Tip (because I’ve been there): If for any reason things aren’t tightening down quite the way you like, pick up a few self-tapping screws from your local hardware store and gently secure the lintel clamp into the iron and the backside of your fireplace door. It’s not cheating—it’s being clever.
Why You’ll Love It (and Why Your Door Will Thank You):
Universal Fit – Works with most masonry fireplace doors
Complete Hardware Kit – No more mid-installation grocery bag bolts
Secure, Sturdy, Satisfying – The door will feel solid, not swingy
DIY-Friendly – No PhD in engineering required
Trusted by Experts (and people like me with strong opinions about fireplaces)
The Bottom Line:
This Standard Lintel Clamp Kit with Bottom Brackets isn’t just a box of parts—it’s the final piece of your fireplace upgrade puzzle. It takes the guesswork out of mounting and replaces it with confidence, control, and a fireplace door that stays exactly where you put it.
So go ahead. Grab that screwdriver, channel your inner DIY royalty, and install that door like the fire-savvy human you are.
And remember—when in doubt, tighten gently and don’t forget the washers.
